Common fault and alarm handling of Markem Imaje 9450 Printer

4510# Alarm Markem Imaje 9450 Printer ink quantity is too low.

4040# Fault Markem Imaje 9450 Printer ink is used up, please replace the new Markem Imaje ink.

4500# Alarm added dose is too low.

4050# Fault additive is used up, please replace with a new additive.

2020# & 2070# Fault Ink spot detection failure.

1. Refer to the cleaning Markem Imaje nozzle program to clean the Markem Imaje 9450 nozzle:

(1) If MB139 / MB554 Markem Imaje ink is used, please use a brush dipped in special Markem Imaje cleaning agent 5909 scrub nozzle.

(2) If using MW420 and other pigment inks, please use a brush to wash.

2. Observe the shape and position of power failure:

(1) The power off position is in the middle of the charging pole;

(2) The power supply shape is small on the top and large  in the below just like the water drop shape;

(3) No satellite points.

3. If the shape and position of the breakpoint are wrong, please adjust the breakpoint, press "Nozzle maintenance", and then press "breakpoint adjustment", the breakpoint will be automatically adjusted, and the adjustment time will be about 13 minutes.

2030# Fault High voltage fault:

1. Check whether the Markem Imaje nozzle is clean, otherwise refer to the cleaning nozzle program to clean the nozzle.

(1) If MB139 / MB554 Markem Imaje ink is used, please use a brush dipped in special Markem Imaje cleaning agent 5909 scrub nozzle;

(2) If using MW420 and other pigment inks, please use a brush to wash.

2050# Fault Markem Imaje cover does not close fault:

1. Check whether the nozzle cover is closed;

2. If the nozzle cover is closed and the fault is still reported, enter the menu: "Service" → "Maintenance" → "Fault detection shielding";

3. Click the "inverted triangle" button on the right of "Nozzle cover Fault", change the allow to prohibit and confirm.

2060# Fault recovery fault:

1. After opening the Markem Imaje 9450 ink line, please immediately observe whether there is ink from the nozzle or whether the ink line is in the middle of the recovery tank;

2. If there is no ink line or the ink line is not in the middle of the recovery tank, do "open the nozzle" and "solvent suction" until the ink line is stable into the recovery tank;

3. If the Markem Imaje 9450 ink line is positive but not recovered, check whether the recovery tank is blocked;

4. Enter the "Service" → "maintenance" → "ink pipeline", and test whether the 9# recovery Markem Imaje valve is normal.

CIJCOD has been focusing on the design, R & D, production, sales and service of coding machines and CIJ printers parts & ink. As for coding machines, CIJCOD is specialized in CIJ, TIJ, DOD machines and other printers. As for CIJ printers parts & ink, CIJCOD is specialized in Domino Printer, Markem Imaje, Videojet, Willett, Linx, KGK, Leibinger, Citronix and Hitachi Printer parts & ink.

Welcome to contact us for Markem Imaje Parts & Markem Imaje Ink inquiry and cooperation. To learn more about Markem Imaje 9450 printer technology, please contact us!