Repair the Videojet printer's ultra-high voltage trip fault

Videojet Printer

Videojet Printer

The ultra-high voltage tripping fault of the Videojet printer is a very common fault during the use of Videojet printers. MICOD Videojet Maintenance Engineer teaches the majority of printer users how to repair the ultra-high voltage trip fault of Videojet printer.
 
1. The print head of Videojet printer should not only be clean, but also dry;
 
2. Is it a trip with a high voltage: if it is, recalibrate the high voltage value; Still can't solve the problem, the Videojet printer's high voltage package may be damaged, need to replace the Videojet high voltage package and test again;
 
3. If it is high voltage, etc., it will trip for a while, it may be due to high voltage leakage.
 
At this time, it is necessary to carefully check whether the high voltage wire on the Videojet printer nozzle is damaged; Whether the high voltage resistor is burned out; 
Listen carefully to the sound during high voltage calibration; 
 
4. If the fault has not been solved, you can use a meter to measure the voltage of the high-voltage input on the IO board of the Videojet printer. Is it stable? If the Videojet IO board is broken, you have to replace the Videojet IO Board;
 
5. How is the grounding condition of the Videojet Nozzle, the ink point splitting is good, and the charging is normal;
 
6. Finally, check if the Videojet printer is grounded.
 
Through the above six steps, the ultra-high voltage tripping fault of the Videojet printer can be basically solved.
 
MICOD specialize in spare parts and filters of Willett Printer, Domino, Videojet, Markem Imaje, Linx etc for years. We sincerely to long term serve each our customers with good quality products, prices and after services.
Source: Videojet Printer Parts | TAG: videojet printer | Posted Date: 2018-12-21 | Visted: 191
Share: