Parts one of Willett 430 printer common faults and solutions

Willett Printer

Willett Printer

The Willett 430 printer has been developed for many years, and its performance is also very good. It has won the trust of the majority of printer users for the quality of the Willett 430 printer. Here MICOD tells you about common faults and solutions for the Willett 430 printer.

1. Willett 430 printer ink line position is not right or unstable reasons and solutions:
 
Reason one: Willett Nozzle is blocked;
 
Solution: Clean the nozzle.
 
Reason two: The nozzle ink line is not adjusted well;
 
Solution: Re-adjust the nozzle.
 
Reason three: The Willett Filter is blocked;
 
Solution: Clean or replace the filter.
 
Reason 4: Venturi sucks back badly.
 
Solution: Check venturi and pipeline recycling.
 
2. Willett 430 printer frequent charging failure causes and solutions:
 
Reason one: the ink points are not well split;
 
Solution: Adjust the ink point split.
 
Reason two: charging slot, the Willett Phase Detector is dirty or wet;
 
Solution: Clean the nozzle, charging tank, Willett phase detector, and dry the nozzle.
 
Reason three: high voltage leakage;
 
Solution: Reduce the corresponding print height.
 
Reason four: the filter is clogged;
 
Solution: Check the cleaning filter.
 
Reason five: poor grounding;
 
Solution: Check the grounding.
 
Reason six: Willett ink is degraded.
 
Solution: Replace the ink.
 
MICOD specialize in spare parts and filters of Willett Printer, Domino, Videojet, Markem Imaje, Linx etc for years. We sincerely to long term serve each our customers with good quality products, prices and after services.
 
Source: Videojet Printer Parts | TAG: Willett printer | Posted Date: 2018-12-28 | Visted: 239
Share: