How to deal with the recovery of Videojet printer

Videojet Printer

Videojet Printer

The specific reasons for the poor recovery of Videojet printer may be:
 
1. The negative pressure of the recovery pipeline is not enough, or is too small;
 
possible reasons: 1) The venturi is blocked or damaged; 2) The recovery valve is blocked or damaged; 3) Recycling pipeline plugging; 4) The recovery pump is blocked or damaged.
 
Inspection and treatment methods:
 
Remove the Videojet V8 valve and venturi and rinse with the cleaning solution to see if it improves. Judging whether the Videojet V8 valve is good or not can be short-circuited. The recovery pipeline plug can remove the recovery pipe from the end of the valve and use the cleaning agent to open. If the recovery pump is damaged, the chassis will leak ink.
 
2. The ink line is not injected into the recovery tube;
 
Possible reasons: 1) Videojet  Nozzle plugging; 2) Ink position is not aligned.
 
Inspection and treatment methods: Check the position of the ink line, if the deviation is very strong, the nozzle is blocked; If you are a little bit, you can adjust the ink line position.
 
3. There are many other reasons for the poor recovery of Videojet printers: such as viscosity, location of the recovery tank, air leaks, insufficient pressure, etc.
 
These are just the most common ways to eliminate bad recycling.
 
MICOD specialize in spare parts and filters of Willett Printer, Domino, Videojet, Markem Imaje, Linx etc for years. We sincerely to long term serve each our customers with good 
 
quality products, prices and after services.
Source: Videojet Printer Parts | TAG: videojet printer | Posted Date: 2018-12-21 | Visted: 228
Share: